Ubiquiti UniFi FlexHD (UAP-FlexHD)

Ubiquiti UniFi FlexHD (UAP-FlexHD)
Ubiquiti UniFi FlexHD (UAP-FlexHD)
Ubiquiti UniFi FlexHD (UAP-FlexHD)
Ubiquiti UniFi FlexHD (UAP-FlexHD)
Ubiquiti UniFi FlexHD (UAP-FlexHD)
Ubiquiti UniFi FlexHD (UAP-FlexHD)
Ubiquiti UniFi FlexHD (UAP-FlexHD)
Ubiquiti UniFi FlexHD (UAP-FlexHD)
Ubiquiti UniFi FlexHD (UAP-FlexHD)
Ubiquiti UniFi FlexHD (UAP-FlexHD)
Ubiquiti UniFi FlexHD (UAP-FlexHD)
Excl. Tax: 440.85AZN
  • Stock: In Stock
  • Model: UAP-FlexHD

Ubiquiti UniFi FlexHD

The WiFi access point supports the standard of wireless communication 802.11 ac revision wave 2, which makes it possible to use such communication improvement technologies as Mu-Mimo, which makes it possible to organize simultaneous data exchange with several subscriber devices at once, and Beamforming using intelligent phase shift control of the signal emitted by several antennas to create the effect of the so-called "constructive" or "enhancing" interference. Using Beamforming can significantly improve the real speed of data exchange with devices, and Mu-Mimo is indispensable for a high load and a large number of active subscribers.

Ubiquiti UniFi FlexHD

In the 5 GHz band, UniFi Flex HD uses the four-stream MIMO 4X4 scheme, which provides bandwidth up to 1733 Mbps. At 2.4 GHz, MIMI 2X2 was used, which, taking into account the use of the older 802.11n standard, provides speeds up to 300 Mbps - a total of 2033 Mbps.

Ubiquiti UniFi FlexHD

Configuring WiFi access points is standard, in the web interface of the UniFi Controller software package, where in addition to power control, network encryption and other standard parameters, there are also detailed statistics on traffic exchange in the entire UniFi network. If necessary, you can customize the model using a mobile application that is available for download on Google Play and the AppStore.

UniFi controller

Antenna gain dBi for 2.4 GHz: 1.6 dBi
Antenna gain dBi for 5 GHz: 4 dBi
Buttons Reset
LEDs: System / Status
Management: Ethernet, Wi-Fi
Mounting: Ceiling/Pole/Tabletop/Wall
Supported Input Voltage Range 44 - 57VDC
System requirements: UniFi Cloud Key or Dream Machine, or machine running Linux, Mac OS X, or Windows 7/8/10
Dimensions: 48.50 x 159.49 mm (1.90 x 6.28")
Weight: 315 g (0.69 lb)
Operating Temperature: -30 to 70° C (-22 to 158° F)
Operating Humidity: 5 to 95% Noncondensing
Interface: (1) 10/100/1000 Ethernet Port
Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
Wi-Fi Standards: 802.11 a/b/g/n/ac/ac-wave2
Power Method: 802.3af
Power Supply: 802.3af, 48V, 0.32A Gigabit PoE Adapter
Max power consumption without attachments: 10.5W
Package Contents: UniFi AP FlexHD Base Mount, Outdoor Mount, Wall/Pole Mount, PoE Adapter* (48V, 0.32A), Power Cord, Plastic Ties (Qty. 2), Screws (Qty. 2), Screw Anchors (Qty. 2)
Certification & Approvals
Certifications CE, FCC, IC