



Hot




Ubiquiti UniFi AC Long Range (UAP-AC-LR)
317.90AZN
Excl. Tax: 269.41AZN
- Model: UAP-AC-LR
Long-range, dual-band, 802.11ac Wave 1 access point with a 1.2+ Gbps aggregate throughput rate.
The Access Point AC Long-Range (UAP AC LR) is a high-performance, indoor 802.11ac WiFi access point that utilizes Wave 1 technology to reach a 1.2+ Gbps aggregate throughput rate with its 5 and 2.4 GHz bands. The UAP AC LR also has an impressively long transmission range of up to 183 meters (600 feet), allowing you to establish and sustain quality connectivity over greater distances. This access point is powered by either PoE or 24 V passive PoE, and is equipped with (1) GbE RJ45 port for high-speed LAN connectivity. The UAP AC LR can be set up in minutes and fully managed with the UniFi Network web application or UniFi mobile app.
Ubiquiti UniFi AC Long Range Unpacking and Specifications:
Features:
- 802.11ac Wave 1 WiFi technology
- 5 GHz band with 867 Mbps throughput rate
- 2.4 GHz band with a 450 Mbps throughput rate
- Signal transmission up to 183 meters (600 feet)
- (1) GbE RJ45 port
- Powered by PoE+* or 24V passive PoE
Through the use of the MIMO 3×3 scheme in the UniFi AP AC LR access point, the maximum data transfer rate in the 2.4 GHz band was increased to 450 Mbps. In the 5 GHz band, the throughput is 867 Mb/s.
With the help of the UniFi Controller proprietary software package, the access point can be easily integrated into an existing network based on UniFi devices, ensuring efficient data exchange even in the largest premises, and thanks to the support of the so-called "seamless roaming" when moving between access points, switching occurs without losing connection with network, which is important, for example, in the case of downloading data.
The innovative design of the WiFi antenna provides symmetrical long-range coverage, so the gain of the UniFi AC LR WiFi antenna not only provides excellent signal transmission, but also excellent reception. In addition, high transmission power allows you to connect to the network even for clients that are far enough from the access point.
How to configure the Ubiquiti UniFi Access Point:
How to install Ubiquiti UniFi Access Point (Ceiling Mounted)
Specifications | |
Buttons | Reset |
Max. TX Power | 2.4 GHz - 24dBm, 5 GHz - 22dBm |
Dimensions: | 175.7 x 175.7 x 43.2 mm (6.92 x 6.92 x 1.70") |
Weight: | 240 g (8.5 oz) |
Operating Humidity: | 5 to 95% Noncondensing |
Antennas: | (1) Dual-Band Antenna, Tri-Polarity |
Mounting: | Wall/Ceiling (Kits Included) |
Encryption: | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
Supported OS: | Linux, Mac OS X, or Microsoft Windows 7/8 |
Interface: | (1) 10/100/1000 Ethernet Port |
Software | |
Wi-Fi Standards: | 802.11 a/b/g/n/ac |
Management | |
Advanced QoS | Per-User Rate Limiting |
Concurrent clients | 250+ |
Guest Traffic Isolation | Supported |
VLAN | 802.1Q |
WMM | Voice, Video, Best Effort, and Background |
Powering | |
Power Supply: | 24V, 0.5A Gigabit PoE Adapter* |
Power Method: | 802.3af/A PoE 24V Passive PoE (Pairs 4, 5+; 7, 8 Return) |
Max power consumption: | 6.5W |