Teltonika FMB001

FMB001 - GNSS / GSM terminal equipped with OBDII interface, easily mounts to any vehicle, supports Bluetooth 4.0 + LE and CAN.

Teltonika FMB001 performs vehicle tracking tasks in real time, collecting coordinates and other necessary data about the vehicle and transmits them to the server via GSM network. Thanks to the OBDII interface, the FMB001 Bluetooth / GSM / GNSS tracker is widely used in applications where a quick and easy installation and dismantling of the device is required:

• - car sharing,
• - insurance temelematics,
• - rental and leasing of vehicles,
• - taxi and courier delivery services,
• - trailers and refrigerators.

Distinctive features

• - Fast and easy installation thanks to OBDII
• - Support for Bluetooth 4.0 + LE provides connection of a headset and various Bluetooth sensors (temperature, humidity, etc.).
• - CAN support: K-Line, read data from vehicle CAN bus
• - Reading data and configuring the tracker via Bluetooth, this reduces the time of its service, simplifies and speeds up the setup
• - Collision detection Crash detection thanks to built-in 3-axis accelerometer
• - Built-in battery for backup power
• - Compact design.
• 
  

• Specifications

  Frequency range, MHz	GSM: 850/900/1800/1900
  Data transfer		GPRS class 12	SMS (text / data)
  Bluetooth		Bluetooth 4.0 + LE for:	Bluetooth voice calls	customization	connections of temperature, humidity sensors, etc.
  GNSS	GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS Tracking: 33 channels Sensitivity -165 dBm Hot start <1 s Warm start <25 sv Cold start <35 s NMEA-183 protocol Accuracy <3m
  Interfaces	1 digital input OBDII (reads data from the CAN bus) Internal GNSS and GSM antennas 2.0 Micro-USB 2 LED indicators Micro-SIM
  OBDII	Data: K-Line, CAN bus data Reading data: up to 32 parameters of the on-board network, 10 supported OBD protocols
  Memory	128MB internal flash memory
  Supply	10 ... 30 V DC with overvoltage protection
  Battery	170 мА*ч Li-Ion 3.7 В
  Operating temperature range	-40°C...+85°C
  Dimensions, mm	50,7 x 49,6 x 25
  Weight, g	63

• 
  

  FMB001 is a car GLONASS / GPS tracker with OBD2 interface, easy to set up, works according to the Plug & Play principle ("plug and play").

  It is a compact car GPS tracker that is easy to install by yourself. To do this, you just need to insert it into the OBD2 diagnostic port, which is available on all modern cars.

  

  

  FUNCTIONS
  

  • Plug and Track

  • Compact and easy to install housing - connects directly to OBD2 connector

  car

  • The Bluetooth® transceiver fully complies with the Bluetooth® V3.0 specification for

  external peripherals

  • Micro SD memory card up to 32 GB for 275 million records

  • Built-in GSM and GNSS antennas make FMB001 installation much easier

  • Tracking in real time

  • Intelligent data collection - based on time, distance, angle, ignition, speed and

  I / O events

  • Sending received data via GPRS (TCP / IP and UDP / IP protocols)

  • Intelligent GPRS connection algorithm to save GPRS traffic

  • Work in a roaming network according to the list of preferred GSM operators

  • Events upon activation of input / output elements and notification via GPRS or SMS

  • Scheduled SMS sending 24 coordinates when GPRS is not available

  • 5 geofences (rectangular or round)

  • Auto Geofencing to detect towing vehicle and prevent theft

  car

  • Deep sleep mode (power consumption less than 2mA)

  • FOTA (firmware update via GPRS)

  • 3 operating modes (home, roaming, unknown) based on operator

  Integrated scripts:

  • "Overspeed" - to ensure the safety of the driver and prevent

  receiving fines

  • Trip start and end detection

  • Signal jamming detection

  • Excessive idle speed detection

  • Tow detection with accelerometer

  • Ability to read data on-board computer of the car

  
  

  SPECIFICATIONS

  
  

  GSM

  • Quad-band support

  900/1800 MHz; 850/1900 MHz

  • GPRS class 12 (up to 240 kbps)

  • SMS (text / data)

  
  

  Bluetooth

  • Bluetooth® specification V3.0

  • The Bluetooth® transceiver is fully compliant with the Bluetooth® specification V3.0 for

  external peripherals:

  • Voice calls via Bluetooth®

  • Configuration via Bluetooth®

  • Bluetooth® sensors

  
  

  GNSS

  • Availability of 33 channels for connection and 99 channels for fixing satellites.

  • Sensitivity up to -165 dBm

  • Hot start <1 s • Warm start <25 s • Cold start <35 s • NMEA-183 protocol • GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS • Accuracy <3 m INTERFACE

  • 1 digital input is reserved for monitoring the ignition state (depending on the type

  car)

  • Accelerometer

  • Power supply range (+10 ... + 16) V DC

  • Built-in backup battery

  • Internal GSM antenna with high gain

  • Internal high gain GNSS antenna

  • Dimensions: L (50.7 mm) x W (49.6 mm) x H (25 mm)

  • 2 LED status indicators

  • Firmware and configuration update (FOTA, Bluetooth®

  and USB cable)

  
  

  Benefits

  
  

  Reading data from OBD2:

  
  

  - Odometer*

  - Total fuel consumption *

  - Fuel level*

  - Engine speed (RPM) *

  - Accelerator pedal position *

  - Engine temperature *

  - On-board electronics error codes *

  * data types depend on the make, model and year of the vehicle.

  
  

  Supported protocols

  
  

  - SAE J1850 PWM (41.6 kbaud)

  - SAE J1850 VPW (10.4 kbaud)

  - ISO 9141-2 (5 baud init, 10.4 kbaud)

  - ISO 14230-4 KWP (5 baud init, 10.4 kbaud)

  - ISO 14230-4 KWP (fast init, 10.4 kbaud)

  - ISO 15765-4 CAN (11 bit ID, 500 kbaud)

  - ISO 15765-4 CAN (29 bit ID, 500 kbaud)

  - ISO 15765-4 CAN (11 bit ID, 250 kbaud)

  - ISO 15765-4 CAN (29 bit ID, 250 kbaud)