







- Model: RB960PGS
MikroTik hEX PoE is a 5x Gigabit Ethernet Router with PoE output for four ports, SFP, USB, 800MHz CPU, 128MB RAM, RouterOS L4.
hEX PoE is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a USB 2.0 port and a SFP port for adding optical fiber connectivity. The ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
It is affordable, small and easy to use, but at the same time comes with a very powerful 800MHz CPU, capable of all the advanced configurations that RouterOS supports. Less power adapters and cables to worry about! Max current is 1A per port, Ethernet ports are shielded.
It also supports
passive PoE input and passive or 802.3af/at PoE output. Ethernet ports 2-5 can
power other PoE capable devices with the same voltage as applied to the unit.
Less power adapters and cables to worry about! It can power at/af mode B
(4,5+)(7,8-) compatible devices, if 48-57 input voltage is used.
Specifications | |
Additionally | Board temperature sensor, voltage sensor |
CPU: | QCA9557 800 MHz |
Ports | 1x SFP 5x 10/100/1000 Ethernet ports |
Dimensions: | 114 х 137 х 29 |
Operating System: | Mikrotik RouterOS Level 4 |
Peripherals | |
USB Power Reset | 1x USB 2.0 type A with the ability to reset (power-reset) the device connected to it |
Powering | |
PoE Distribution | Ports 2–5 With an input power supply of 12-30 V: Passive PoE (voltage matches the voltage at the input of the router) The maximum current for each port is 1 A (total for all ports up to 2 A) With an input power supply of 31–47 V: Passive PoE (voltage matches the voltage at the input of the router) Maximum current per port 0.45 A With an input power supply of 48–57 V: 802.3af / at (voltage matches the voltage at the input of the router) Maximum current per port 450 mA (classification not supported) |
Supply | Passive PoE 10–57 V, pins: 4, 5 (+); 7, 8 (-) or 802.3af / at or Jack 10–57 V |
Max power consumption: | 9 Watts |