Access Point with dual-band 2x2 MIMO in a compact design for low-profile
Lite is a 2x2 Wi-Fi 6 access point that delivers up to 1.5 Gbps aggregate radio
rate with 5 GHz (MU-MIMO and OFDMA) and 2.4 GHz (MIMO) radios. Mount UniFi 6
Lite horizontally in the ceiling to cover a high-density environment, or mount
it vertically on the wall to extend its range. UniFi 6 Lite has a compact and
nano-sized design, so it can use nanoHD covers and mounting accessories.
high-efficiency Wi-Fi 6
- 5 GHz
band 2x2 MU-MIMO and OFDMA with radio rate of 1.2 Gbps
- 2.4 GHz
band 2x2 MIMO with radio rate of 300 Mbps
Ethernet, powered with 802.3af PoE
Compatible with UAP-nanoHD covers and recessed mounting bracket
UniFi Network Controller version: 5.14.3 or higher.
Build your Wi-Fi 6 network with the best.
The Unifi 6 lite (U6-Lite) access point was created by Ubiquiti with support for the Wi-Fi 6 standard. The device surpasses most in its highest performance. And if you need to provide a reliable Wi-Fi Hot-spot for a huge number of clients, then you should definitely buy Unifi 6 lite.
The engineers have equipped the access point with the highest performance radio with a 2X2 MIMO configuration. And Unifi 6 lite is dual band, which means it supports 2.4 and 5 GHz channels. The value of the transmission speed in total from the two channels reaches 1.5 Gbps. At the same time, in the 2.4 GHz range, the speed is up to 300 Mbps, and the remaining 1.2 Gbps will be provided for the 5 GHz range.
Wi-Fi 6 APs
deliver an aggregate radio rate of up to 1.5 Gbps with 5 GHz (2x2 MU-MIMO and
OFDMA) and 2.4 GHz 2x2 MIMO radios.
wider wireless coverage
access point utilizes Wi-Fi 6 technology to provide strong and expansive
wireless coverage to all enterprise networking environments.
2x coverage increase
The Unifi 6 lite design is traditional throughout the series. The access point is designed for ceiling mounting only. Disc-shaped body. Disc dome lighting introduced. The color changes relative to which mode / state the connection is in
connect to more devices
support over 300 distinct client connections.
The engineers have made sure the UniFi 6 Lite Access Point is compact. The bow has only one Ethernet port that is used to connect to the network. The port supports 802.3 AF PoE to receive power over a cable. The power supply is sufficient for the radio module to work at full strength.
The UniFi 6 (U6-Lite) Lite Access Point is controlled by a convenient software suite called the UniFi Controller. It helps you make power adjustments, select the radio bandwidth, enable encryption, use the SSID, and manage many other parameters.
How to Configure - Ubiquiti UniFi Access Point
2.4GHz - 2.8 dBi
5GHz - 3 dBi
Max. TX Power
Supported Input Voltage Range
44 to 57VDC
2.4GHz - 300 Mbps
5GHz - 1201 Mbps
Ø160 x 32.65 mm (Ø6.3 x 1.3")
Without Mount: 300 g (10.6 oz)
With Mount: 315 g (11.1 oz)