Menu
Cart

RF Elements UltraDish Directional Antenna TP 400 (ULD-TP-400)

RF Elements UltraDish Directional Antenna TP 400 (ULD-TP-400)
RF Elements UltraDish Directional Antenna TP 400 (ULD-TP-400)
RF Elements UltraDish Directional Antenna TP 400 (ULD-TP-400)
RF Elements UltraDish Directional Antenna TP 400 (ULD-TP-400)
RF Elements UltraDish Directional Antenna TP 400 (ULD-TP-400)
RF Elements UltraDish Directional Antenna TP 400 (ULD-TP-400)
RF Elements UltraDish Directional Antenna TP 400 (ULD-TP-400)
RF Elements UltraDish Directional Antenna TP 400 (ULD-TP-400)
RF Elements UltraDish Directional Antenna TP 400 (ULD-TP-400)
306.00AZN
Excl. Tax: 259.32AZN
  • Model: ULD-TP-400

UltraDish TP-400

Parabolic antennas with TwistPort connector and innovative mount.


High Gain Directional Antennas


UltraDish TP antennas are high gain directional parabolic antennas with lossless TwistPort connector. The antennas are highly directional and have suppressed side lobes for maximum performance.


Beam performance


UltraDish TP antennas suppress sidelobe radiation, which reduces interference and allows them to be installed in high noise areas. The amplification of UltraDish TP antennas is achieved by focusing the signal fed through the TwistPort waveguide.

 

TwistPort connector


The TwistPort is a fast waveguide port that connects the radio to the antenna with virtually no loss. The TwistPort connector sets a new standard for outdoor wireless equipment in terms of performance, scalability, ease of use, and ease of deployment.


Easy to connect


TwistPort is the new definition of easy. By integrating the mechanical and RF connection into the same structure, you can easily connect the radio to the antenna - “turn and lock” - and it can be done with one hand


No Loss

Virtually lossless TwistPort connectors: There are no RF coaxial connectors or RF cables that contribute to significant signal loss. Compared to commonly used coaxial cables and connectors, losses on the TwistPort are nearly impossible to measure

 

Cross-platform compatibility

UltraDish TP antennas can be used with any TwistPort radio or with a variety of third party radios connected via a TwistPort adapter.

 

Innovative mount

The UltraDish TP antennas have a new innovative mounting system. The mount is separate from the antenna making installation and tuning of the antenna easy and quick.


Step 1: Installing the bracket


Install the bracket onto the pole first. Two sets of mast screws for different pole diameters are included.

The pole bracket is reversible: it can be installed on the left or right side of the antenna.

Step 2: antenna tuning

Simply insert the antenna into the bracket and adjust the height and azimuth. Tighten the screws to complete the installation.

Only one tool is needed for the entire installation.



Specifications
Antenna beam width Azimuth Beam Width -6 dB H 11° / V 11° Elevation Beam Width -6 dB H 11° / V 11° Azimuth Beam Width -3 dB H 7° / V 7° Elevation Beam Width -3 dB H 7° / V 7°
Frequency Range 5180 - 6100 MHz
Tested ambient temperature: -40°C ... 60°C
Powering
Power Method: 33620